3- (TriMethoxysilyl) Propyl Methacrylate CAS No 2530-85-0

• Customization: Available
• CAS No.: 2530-85-0
• Kind: Emulsifier
• Model NO.: GX-570
• Appearance: Liquid
• Application: Appliance Paint, Building Coating, Car Paint, Furniture Paint, Paper Coating, Plastic Coating, Rubber Coating, 5
• Special Function: Flame Retardant, Antistatic, Conductive, Biocidal, Antirust, 15
• Property: Oil-Solution
• Auxiliary System: Oil Type Coating Auxiliary Agent
• Usage Stage: Manufacturing Stage
• Transport Package: as Customer Request
• Specification: 99.5%
• Trademark: GBXF
• Origin: Anhui, China
• Production Capacity: 500 Tons Per Month

Product Description

Silane GX-570

Introduction
Chemical Name : γ-methacryloxypropyltrimethoxysilane
CAS NO. : 2530-85-0
Molecular Formula:CH₂=C(CH₃)COO(CH₂)₃Si(OCH₃)₃
Foreign  Company's  Trademark:
A-174(Momentive,USA)
Z-6030(DowCorning,USA)
KBM-503(ShinEtsu,Japan)
GF31(Wacker,Germany)

Features and Benefits

The methacryloxylsilane produced by  silane GX-570.

• Significantly improves composite strengths when the composite is reinforced with fibreglass roving sized with a typical polyester-compatible formulation. These formulations normally incorporate silane coupling agents, film-forming resins, lubricants and antistatic agents.

• Enhances the strength performance, both initially and after wet-conditioning, of cured polyester resin composites filled with silica, glass, silicates and many metal oxides.

• Enhances the wet electrical properties of many mineral-filled composites, such as crosslinked polyethylene and polyvinyl chloride.

• May be copolymerized with vinyl acetate and acrylate or methacrylate monomers to prepare silylated polymers that are moisture-curable. These silylated polymer may be used in coatings, adhesives and sealants to provide superior adhesion and durability.
• Typical Physical Properties
  Determined on commercial material whose properties may vary within the specification limits.
  _____________________________________________________
  Physical Form Clear liquid
  Colour, Pt-Co  Max 30
  Specific Gravity at 20°C, g/cm³ 1.040 - 1.055
  Refractive Index, n_D 25°C 1.428 -1.432
  Purity, % Min 98.0
  
  Solubility
  
  Silane GX-570 is soluble in ethanol, methanol, isopropanol, acetone, benzene, toluene, and xylene. After hydrolysis it is soluble in water with adequate stirring if the pH is adjusted to 4.0. Hydrolysis releases methanol.
  
  Application
• Silane GX-570 has found its utility in the manufacturing of many intermediate goods such as: unsaturated polyester, ethylene-propylene diene copolymer, polystyrene, ABS, polyurethane, polybutadiene and polyethylene crosslinked by peroxide. For the finished goods like polyester reinforced material, Ethylene-propylene-non-conjugated diene cable and so on. Modified by silane coupling agent, dihydrate gypsum gesso, can not only be used as filling of artificial marble to reinforce the bending strength of board but also greatly reduce the production cost of artificial marble.
• Glass Fibre Soakage Agent
• Glass fibre soakage agent is used in the treatment of glass fiber. It contains film former, lubricant, antistatic, silane coupling agent and water etc. The concentration of the silane coupling agent should be of 0.3%-0.6%.
  3. Electrical wire and cable
  When used in electrical wire and cable, silane GX-570 can greatly improve its mechanical performance and electrical performance in wet state. When applied in argil, silane GX-570 can dramatically better the consumption factor, inductance and capacitive reactance of the EPM (ethylene propylene monomer) and EPDM (Ethylene-Propylene-Diene Monomer) systems crossed linked by peroxide and filled with argil. Silane GX-570 results 2.5 times better than vinyl silane with the same dosage.
• 4.  Filler Treatment
  This silane can improve the mechanical strength of polyester composite materials made from filling white carbon black,glass, silicate and metal oxide in either dry or   wet state, for instance, crosslinked polyethylene and polyvinyl chloride.
   
• Adhesive and Coating
• Silane GX-570 can be applied in acrylic resin and polyester adhesive in the purpose of improving its water resistance and adhesion stress with inorganic material, and also lowering its solidification value.
  
  
  Package:
• 25KGS/Plastic Drum
• 200 KGS/Steel Drum
• 1000KGS/IBC
•